How to Replace the Inner Tube on an E-bike

How to Replace the Inner Tube on an E-bike

Maintaining your electric bikes plays a massive role in determining how much you will enjoy your ride. When your inner tube is in the proper condition, it makes riding much more effortless. However, it would be best if you got the right replacement tools. You may also check your manufacturer guidebook for appropriate instructions. Nevertheless, as you read this article, you will discover a simple and vital inner tube replacement process.

Deflate the Electric Bike Tire


To work conveniently on the bike's inner tube, you need to start by removing the wheel. Thus, this will require you to deflate the tire, so you can easily detach the wheel from the electric bike frame. Meanwhile, this removal process also depends on the type of electric bike. For instance, if your bike wheel has a quick-release mechanism, you simply need to open it. On the other hand, you will need a wrench to loosen or remove a bolted wheel.

Remove the Tire

After deflating the tire, successfully release it from the rim using a tire lever. You need to be careful not to damage the electric bike's rim while at it. You may also use a second supportive lever under the tire's bead. Make sure you do not trap the rim against the tire in order not to create a puncture. If the tire is too tight, you may apply the levers simultaneously. However, you will need to be extra careful while doing this. Make sure not to damage any other part of the bike.

You can remove the tires with your hand if you don't have a lever. Firstly, you must position the wheel appropriately while shaking off the slack. If you feel the slacks are pretty much, adjust the rim and tire edge with your thumb. This ensures the inner tube isn't trapped between the tire lever and rim.

Remove the Old Inner Tube

Once you successfully release the bike tire, it is much easier to remove the inner tube. Use your lever to pull out the inner tube while placing the valve back into the tire hole. Inspect the inner tube and tire for any holes or punctures before fixing a new one. If nails or any other sharp object is in the tire, it may puncture any new inner tube you install. You also need to be careful of hurting yourself while running your hand through the bike tire. Having put all things in place, you can go ahead to install the new inner tube.

Position the New Tire

Make sure you position the tire well to allow you quickly identify any puncture or hole. You also need to ensure the tire matches the valve hole so that it can look perfectly done.

Inflate the Inner Tube

Put some air into the new inner tube to give it shape before inserting it into the tire. You should also remove the threaded collar, which will be used later. Make sure to check out for weird bumps while inflating the inner tube. Continue to apply pressure to the inner tube until the inward air is evenly distributed. If you use an Honbike tire, you will find the recommended pressure for the particular model in your user's manual. You should also position the valve correctly while inflating the inner tube.

Fit the Tube

Ensure the inner tube is not pinched between the rim and the tire as you insert the inner tube into the belly of the tire. This requires a careful examination to avoid pinching the inner tube.

Fit the Tire


The other side of your bike tire will still need to be properly enclosed. Thus, use your thumb to adjust the tire to the rim. Sometimes, the tires may be too tight. Thus, you will need to follow the same process as you did with the slacks while removing the old inner tube.

You should use a bike lever if you cannot fit the tire with your thumb. Place the levers under the tire edge, and use one lever to shift the tire into the rim. It would be best if you used the other lever as support to avoid slippage while in motion.

Fit the Wheel

Make sure to fix the wheel onto the bike properly. You may also use an Allen wrench to tighten the bolts. Ensure the wheel is fully secured and the bolts are tight enough.

Test the Tire

Spin the wheel and check that the tire rotated smoothly. Also, confirm that the inner tube is not visible through the tire. This will also help you confirm whether the tire was inflated to the correct pressure. If you notice any sight imbalance, re-position the inner tube, then carefully inflate the tire again.

Why You Should Get a Quality Inner Tube as a Replacement

Relying on an old inner tube with a low-quality one will significantly affect your ride performance. To have a reliable and smooth ride, use a quality inner tube that will prevent frequent shifts or collisions while riding. This may cause inconvenience and even expose the rider to danger while cycling. It will also save you the time and money to find another replacement sooner than later. Thus, choose an inner tube with durable material and consistent wall thickness.

Buying a Quality Inner Tube for Your Bike

Knowing the importance of using a quality inner tube as a replacement, how do you make the right buying decision? These factors will help in choosing the right quality of the inner tube.

  • Material: The top factor determining your inner tube's quality is the material. High-quality inner tubes are made of butyl rubber, which can be found in the Honbike Uni4 model. It provides good air retention, increasing resistance against foreign objects such as nails.
  • Size: You must make sure you are getting the correct size of the inner tube, both in terms of diameter and width. This ensures you get an inner tube that perfectly fits into the bike rim. If you are buying an Honbike bike, be guaranteed the customer team is available to recommend and customize the right size for you. You may communicate with bike experts via the live chat feature. However, the average size for a Uni4 model is 2.0 width, which is perfect for a 27.5inch wheel.
  • Valve Type: Make sure to choose the correct valve type for your electric bike. Thus, choose a valve length that is compatible with your rim depth.
  • Wall Thickness:An inner tube with a thick wall is usually heavier than one with a thin wall. However, it has greater resistance against puncture.
  • Brand Reputation: The inner tube manufacturing brand will also improve its effectiveness. Thus, choose inner tubes from brands known for producing high-quality items. As a result, this article recommends you check customers' reviews to know more about a brand's reputation.


It would be best if you created a maintenance routine for your electric bike tire. This will improve its durability and prevent you from overspending on replacement. Thus, you can quickly fix any damaged part before it escalates. You may also check your user manual or reach out to an expert on maintenance advice. This will prevent you from causing extra damage while implementing the maintenance procedure.


Leave a comment

Please note, comments must be approved before they are published